Hot Tub Sanitizers
Please note: Not all products are in-stock and may require to be ordered. Please call store for inventory details.
Please note: Not all products are stocked and may require to be ordered. Please call store for inventory details.
<< Back
Easy Brome
Item ID: (29-21216-12)
Brand: IPG
EASY BROME
SANITIZER
Is a practical easy to use sanitizer for spa and hot tub water.
It rapidly and completely dissolves to provide effective bromine disinfection
without cloudy or insoluble residue in the water.
Is a super oxidation
treatment to rid spa water of organic waste such as perspiration, body oil,
cosmetics that tend to cloud water.
Can be used as a pre-treatment to
create a bromine bank in bromine spas and hot tubs.
1.
Maintain recommended daily levels as determined by testing kit.
Free
available bromine: 3.0 - 5.0 ppm
pH: 7.2 - 7.8
Total alkalinity:
100 - 120 ppm
Calcium hardness: 150 – 200 ppm
2. The
filtration system should be maintained in order to ensure proper disinfection.
3. Apply 6 g of EASY BROME per 1,000 L of spa water directly to bather-free
spa water with circulation system operating. Test for available bromine and repeat
above dosage at 15-20 minute intervals until a residual of 3.0 – 5.0 ppm is
reached.
4. Periodic superchlorination of spa water is recommended
after heavy use, or once a week, in moderately used spas to remove organic
waste. Apply 35 g of EASY BROME per 1,000 L of spa water as often as required.
Bathers should not use spa until reading drops to 5.0 ppm.
5. Persistent
foam formation, turbid, or malodorous water, are indicators of inadequate sanitizer
levels. To correct such conditions, superoxidize water by adding 25 g of EASY
BROME per 1,000 L of spa water. Maintain circulation at least 30 minutes and wait
4 hours before using. EASY BROME contains stabilizer (cyanuric acid) which will
accumulate in spa water. Keep stabilizer within 30-100 ppm range by dilution with
fresh water.
6. For proper sanitation, spa must be completely drained
periodically.
BROMINE SANITATION:
Test
bromine levels daily.
Maintain a daily bromine sanitizer level of 3 – 5
ppm.
Use on initial fill of spa and weekly for maintenance.
Can be used to pre-treat bromine spas and hot tubs.
Buy29-21216-12
Bromine Tablets
Item ID: (29-21055-15)
Brand: IPG
Each 20 g tablet provides effective bromine sanitation
when used as directed.
Is an effective disinfectant when used as directed.
WARNING: Direct tablet contact may cause bleaching
of vinyl, acrylic or synthetic spa surfaces. Automatic feeding devices employing
these tablets must be totally free of other spa sanitizers to avoid the probability of
explosion.
1. If using an automatic feeding device, fill
the chamber(s) with tablets and adjust flow rate according to manufacture’s
recommendations to maintain proper bromine residual. Adding tablets to the spa’s
skimmer basket is an alternative bromine feed method. Daily usage should
approximate 5 g of BROMINE per 1,000 L of spa water. NOTE: heavy spa usage
and higher temperature usage rates may require higher usage rates to maintain
proper bromine residuals.
2. Periodic superchlorination
of spa water is recommended. Follow label instructions of superchlorination
product being employed.
3. Persistent foam formation,
turbid or malodorous water are indicators of inadequate sanitizer levels. To correct
such conditions, superchlorinate spa water by adding superchlorination product.
Maintain circulation at least 30 minutes and wait 4 hours before using.
4. For proper sanitation, spa must be drained periodically.
Buy29-21055-15
Extra
Item ID: (29-21245-80)
Brand: IPG
EXTRA
STABILIZED CHLORINATING TABLETS
29-21245
Each 15 g tablet provides effective chlorine sanitation when used as directed.
Is an effective disinfectant when used as directed.
WARNING: Direct tablet contact may cause bleaching of vinyl, acrylic or synthetic spa surfaces. Automatic feeding devices employing these tablets must be totally free of other spa sanitizers to avoid the probability of explosion.
1. Maintain recommended daily levels as determined by testing kit.
Free available chlorine: 3.0 - 5.0 ppm
pH: 7.2 - 7.8
Total alkalinity: 125 - 150 ppm
Calcium hardness: 150 – 200 ppm
2. Superchlorinate a freshly filled spa by adding 20 g of EXTRA per 1,000 L of spa water. Maintain water circulation for at least 1 hour before entering the spa (always measure your free available chlorine level before using the spa to make sure it falls within the recommended levels). Repeat superchlorination procedure after each use period.
3. If using an automatic feeding device, fill the chamber(s) with EXTRA tablets and adjust flow rate according to manufacture’s recommendations to maintain proper chlorine residual. Adding tablets to the spa’s skimmer basket is an alternative chlorine feed method.
4. Maintain proper chlorine residual by adding10 g of EXTRA per 1,000 L of spa water, daily or as needed.
5. Persistent foam formation, turbid or malodorous water are indicators of inadequate sanitizer levels. To correct such conditions, superchlorinate spa water by adding 30 g of EXTRA per 1,000L of spa water. Maintain circulation for at least 1 hour and wait 4 hours before using (always measure your free available chlorine level before using the spa to make sure it falls within the recommended levels).
6. Note on Superchlorination: EXTRA contains stabilizer (cyanuric acid) which can accumulate in spa water. Use of Spa Tab for superchlorination will raise stabilizer level at a faster rate. Keep stabilizer within the recommended range of 30-100 ppm by dilution with fresh water. Superchlorination with EXTRA will also lower total alkalinity. Make sure that the total alkalinity stays within recommended levels.
7. For proper sanitation, spa must be drained periodically.
SANITATION:
Test free available chlorine levels daily.
Maintain a daily free available chlorine sanitizer level of 3 – 5 ppm.
Check tablets regularly to ensure adequate sanitation and disinfection of spa water.
For proper sanitation spa must be drained periodically.
Buy29-21245-80
Quick 100
Item ID: (29-21210-80)
Brand: IPG
A practical and easy to use sanitizer for spa and hot
tub water (dichlor).
1. Maintain recommended daily
levels as determined by testing kit.
Free available chlorine: 3.0 - 5.0
ppm
pH: 7.2 - 7.8
Total alkalinity: 100 - 120 ppm
Calcium hardness: 150 – 200 ppm
2. Superchlorinate a freshly
filled spa by adding 20 g of QUICK 100 per 1,000 L of spa water. Maintain water
circulation at least 15 minutes before using. Repeat superchlorination procedure
after each use period.
3. Maintain proper chlorine residual by adding 10
g of QUICK 100 per 1,000 L of spa water, daily or as needed.
4.
Persistent foam formation, turbid, or malodorous water, are indicators of
inadequate sanitizer levels. To correct such conditions, superchlorinate spa water
by adding 30 g of QUICK 100 per 1,000 L of spa water. Maintain circulation at least
30 minutes and wait 4 hours before using.
5. QUICK 100 contains
stabilizer (cyanuric acid) which will accumulate in spa water. Keep stabilizer within
the range of 30-100 ppm by dilution with fresh water.
6. For proper
sanitation, spa must be completely drained periodically.
CHLORINE SANITATION:
Test chlorine levels daily.
Maintain a daily free available chlorine level of 3 – 5 ppm.
Use
weekly and/or as required to superchlorinate and to ensure safe and enjoyable hot
tub or spa water.
Test pH regularly and adjust to 7.2 – 7.8 to ensure
proper water sanitation.
PRECAUTIONS:
CAUSES BURNS.
DANGEROUS FUMES FORM WHEN
MIXED WITH OTHER PRODUCTS.
Always add chemicals to water,
NEVER add water to chemicals!
Buy29-21210-80
Brome Boost
Item ID: (29-21124-40)
Brand: IPG
High performance liquid product
for starting pre-treatment for hot water. Provides crystal clear water to allow
spa usage rapidly. Will also eliminate coloured deposits from spa water and
surfaces when used in conjunction with ZAP. Suitable for all types of spas.
Buy29-21124-40
Spa 1
Item ID: (29-21120-90)
Brand: IPG
SPA 1
1st part of 2 product sanitizer
systems
29-21120
Provides bromine
sanitation when used with SPA 2.
Concentrate liquid formula that does
not leave powdery residue and provides quick results.
1.
SPA 1 must be used in combination with SPA 2 to effect bromine sanitation in spa
waters.
2. Initial dosage: Add 125 mL of SPA 1 per 1,000 L of spa water.
3. Weekly dosage: Add 30 mL of SPA 1 per 1,000 L of spa water.
4. Add SPA 2 as directed.
DISPOSAL:
Do not reuse
empty container. Wrap and dispose of empty container with household garbage.
For information on disposal of unused, unwanted product, contact the
manufacturer or the Provincial Regulatory Agency. Contact the manufacturer and
the Provincial Regulatory Agency in case of a spill and for clean-up of spills.
BROMINE SANITATION:
1st part of a 2 part
sanitation system, provides bromine sanitation when used with SPA 2.
Test bromine levels daily.
Maintain a daily bromine sanitizer level
of 3 – 5 ppm.
Use on initial fill of spa and weekly for maintenance.
PRECAUTIONS:
CAUSES BURNS.
DANGEROUS FUMES FORM WHEN MIXED WITH OTHER
PRODUCTS.
Always add chemicals to water, NEVER add water to
chemicals!
Buy29-21120-90
Spa 2
Item ID: (29-21330-80)
Brand: IPG
Size 800g
Also comes in 2.5Kg
SPA 2
2nd PART OF 2 PRODUCT
SANITIZER SYSTEM
29-21330
Provides
Bromine Sanitation when used with SPA 1.
1. SPA 2
must be used in combination with SPA 1 to effect bromine sanitation in spa waters.
2. Maintain recommended daily levels as determined by testing kit.
Bromine: 3.0 - 5.0 ppm
pH: 7.2 - 7.8
Total
alkalinity: 100 - 120 ppm
Calcium hardness: 150 – 200 ppm
3. Add SPA 1 to spa water as directed.
4. Treat a freshly filled spa
by adding 125 g of SPA 2 per 1,000 L of spa water to release bromine sanitizer
from the bromide salt solution of SPA 1. Maintain water circulation at least 30
minutes before using.
5. Maintain the proper bromine residual by adding
30 g of SPA 2 per 1,000 L of spa water, daily or as needed.
Persistent
foam formation, turbid, or malodorous water, are indicators of inadequate sanitizer
levels. To correct such conditions, shock spa water by adding 125 g of SPA 2 per
1,000 L of spa water. Maintain circulation at least 30 minutes and wait four hours
before using.
6. For proper sanitation, spa must be completely drained
periodically.
BROMINE SANITATION:
2st part
of a 2 part sanitation system, provides bromine sanitation when used with SPA 1.
Test bromine levels daily.
Maintain a daily bromine sanitizer
level of 3 – 5 ppm.
Use on initial fill of spa and weekly for maintenance.
PRECAUTIONS:
CAUSES
BURNS.
DANGEROUS FUMES FORM WHEN MIXED WITH OTHER
PRODUCTS.
Always add chemicals to water, NEVER add water to
chemicals!
Buy29-21330-80
Spa Zap
Item ID: (29-21350-30)
Brand: IPG
Effectively destroys the organic residue in spa
water.
Is an oxidizing and clarifying treatment in one.
Efficiently accelerates the elimination of organic contaminants in spa water.
Re-activating treatment that restores the sparkle to spa water.
Suitable for all spa surfaces.
Is compatible with all spa sanitizers.
Pre-packaged and pre-measured for ease of use and handling.
Buy29-21350-30
Share with a friendMore online client services than any other Pool/Spa Dealer
Discover Now
