When you start your pool, at springtime or during the regular season, shock treatments are required and a waiting period is necessary until the residual value has dropped to the recommended levels of 1 to 3 ppm.   

If you wish to decrease the sanitizer residual rapidly, use TERMINATOR and take advantage of your pool immediately. TERMINATOR will not affect the colouring of vinyl, cement or fibreglass pools.

Application:

To reduce sanitizer level before using your pool:

1. Test the sanitizer level. If readings are higher than 3 ppm, add TERMINATOR in small quantities (50 ml per 10,000 L of pool water) to reduce high sanitizer level back to acceptable levels 1-3 ppm.
2. Wait for 1 hour.
3. After adding TERMINATOR, check water's pH and adjust to 7.2-7.8 if necessary.

RECOMMENDATION:
Do not exceed dosage. Use in small increments and test water between additions of this product